Factory Flexible Copper Clad Laminate Metallized Electric Insulating Polyimide Film PriceFlexible polyimide copper clad laminate
Polyimide Flexible Copper by the follow-up co-polyimide film, copper foil and the adhesive composition. The product is mainly used for: gas car electronics, industrial instrumentation, communications equipment, household appliances, aerospace and aviation.
High peel strength
Good flexibility and excellent heat resistance
Good dimensional stability and chemical resistance
Excellent resistance to dip soldering of
High-Tg non-prime substrate fontanel
SLP flexible laminates are available in a broad range of copper clad constructions using a wide variety of base dielectrics. These laminates are available in either adhesive based or adhesiveless form.
Adhesive based clads, also known as 3-layer, are made using Polyimide film and are available in sheet form with either SLP FR or LF acrylic adhesive. Also available, under the SLP Brand name, is an epoxy adhesive based 3-layer clad in roll form.
Adhesiveless clads, also known as 2-layer, are available either as double-sided using a lamination based manufacturing process or single sided utilizing cast technology.
Post cure condition: ramp=160°C/hr, from room temperature to 160°C for 1 hour
|Thickness (um)||±3||76||130||88||APLUS Spec|
|Peel Strength (kgf/cm)||A||Common Cu >0.7||-----||>1.0||>0.8||IPC-TM-650 2.4.9|
|Double-sided bright Cu >0.3||>0.51||-----||-----|
|Common Cu >0.5||-----||>0.9||>0.7|
|Double-sided bright Cu >0.3||>0.44||-----||-----|
|Dimensional Stability (%)||MD||±0.10%||<0.06||<0.06||<0.02||IPC-TM-650 2.2.4|
|Solder Resistance||230°C×30S||Pass||Pass||Pass||IPC-TM-650 2.4.13|
|UL Flame class||UL HB||-----||Pass||Pass||UL 94|
|Shelf Life||<30°C/70%RH||1 year||1 year||1 year||APLUS Spec|
1.Listed product specifications can be processed according to actual demand, not necessarily limited to the specifications set out in this table.
2.The above performance data are typical values, the actual data is subject to product testing report.
3.The above experimental methods according to the IPC-TM-650 in the implementation of standards
4.Listed in this table raw materials wit are subject to change without notice, and ultimately with the formal quotations stated in the company.
Production specifications list
|Single Side FCCL||ED Copper||AHESE1200||25||20||18||250 or 500||100||3 inches|
|AHESE2200||50||20||18||250 or 500||100||3 inches|
|AHESE2250||50||25||18||250 or 500||100||3 inches|
|AHESE3201||75||20||35||250 or 500||100||3 inches|
|RA Copper||AHESR2080||50||8||18||609||100||3 inches|
- Traditional flex circuits
- High density flex circuits
- Chip on film (COF) substrate
- Chip scale packaging (CSP)
- Ball grid array (BGA)
- Tape automatic bonding (TAB)
Package and Storage
Please put the flexible copper clad laminate at the room temperature 20±5ºC in air-conditioned environment and at relative humidity 55±15%, which can meet itsshelf-life for one year. At the same time, please keep from moisture and oxidation, don't touch the FCCL with bare hand.
Xuchang Ruiyuan insulation material co.,ltd insist on the
idea " GOOD QULAITY, GOOD SERVICE ". it is establish 20years old.
It is located in Xuchang City, Henan Province, China. From 2010 year old our company begin deal international trade, based on the original business. Till now we import and export to many contries, such as United Kingdom, Germany, France, Ukrain, Bulgaria, Italy, India, Pakistan, Bangladesh, Korea, Brzil and so on.
Our manufacturing technique is leading in this field and well known in the world. Now there are more than 20 product facilities, and 105 staff, including 5 senior technical, 20 intermediate technical. Main products are manufactured on international standard.
Our products mainly used for transformer and electrical motor, we produces insulation paper, insulation board, insulation tape,insulation film and also sales PTFE FR4 PA6 and cable wire.
We will develop with you by best-quality products, warm-hearted service and mutually beneficial cooperation!
Package and shipping